Sludge by turning in R, R+1/3 R and full diameter scales according to the amount of sludge going to the bottom in the Sedimentation Tanks the bridge that serves to perform the scraping operation; assembly and accessories are custom designed and manufactured to order.
ATEX 60079-1 ZONE2 II 3G Eexd IIB T4\' There is a suitable Project standard.
Body and Scraper Materials
AISI 304 and 316 Series Stainless Steel, Epoxy Painted or Hot Dip Galvanized
Surface Scraper Panels, Weirs and Scum Baffles are optionally manufactured from GRP material.
Scum Scraper System
Consisting of panels that are connected to the bridge with suspension arms. The scum accumulated in the scum baffle are transferred to the scum hopper via the sum panels and discharged.
Pump type discharge is optional
Sludge Scraper
It consists of panels that are connected to the bridge with suspension arms. Adapts to the tank bottom by means of wheels
Drive System
There is a single-wagon peripheral driving system on R and R+1/3 R Type Bridges, and a 2-wagons system on full-width bridges. There is one polyurethane coated one driving and one idle wheel in each wagon.
Wheel-Walk Adjustment System Available
Central Bearing System
There is a special center bearing and pivot system that allows vertical oscillations of the Bridge.
Accessories
Weir and Scum Baffle System
Control Panel (Op.)
Self Washing Scum Hopper
Weir Washing Brush
Center Brush
Motion Sensor
Obstacle Recognition Sensor (Op.)
Torque Sensor (Op.)
Infrared Ice Breaker (Op.)
Handrail Assembly
Emergency Stop Button
Entrance Ladder
Lighting (Op.)
Cabling (Op.)
.jpg)
